c.
Lightweight aluminum 8” mounting base with heavy duty 2” x 8” drip rail
clamps d. 3” x 1.5” reinforced aluminum cross
bar with built-in channels top and bottom e. Mounting bases slides into bottom of
the cross bar allowing correct fitment onto drip rail f.
2 eyehooks available per mounting base for easy tie-down g. Approx. 24 lbs 2 bar system with
hardware h. Open slot on top andbottom of cross
bar for optional accessories i. Side rails available in accessory
section j. Aluminum system with rubber bar ends
total height at 7” k.
Aluminum system with A03 side support total height at 11”
Looking
for a all in one system? Got a ladder and kayak that needs hauling?
Well, stop searching you've found it! Introducing the new H3 system.
Accepts all Yakima and Thule accessories with aero-bar. More Vantech
accessories at the bottom of this page.
No
drilling required
7.0" low clearance (without side supports
part #A3)
Extra strength extruded 3.5" x 1.5" oblong
cross bar
A03 sides are 4.5" tall preventing material
sliding off the side
Aero designed cross bars were made to make
little to no wind noise
1"
eyehooks located on each side support for
easy tie-down and bungee
Aluminum mounting base
Powder coated
high-gloss finish (choice of black/white/silver)
